Change a Propane Tank
Forklifts powered by propane are common inside warehouse environments. These forklifts have a propane mount situated behind the operator. These tanks have to be replaced from time to time since they have limited lifespans. Operators of forklifts should use caution when handling propane tanks. Compressed gases are very hazardous, particularly since the gas is flammable. Always use caution when removing and replacing propane tank to prevent injury.
1 If there is a need to change the propane tank, the first step is to stop the lift truck, then turn off the tank valve. The lift truck should be left on until the engine dies. This procedure burns off the gas inside the transfer hose which connects the engine and the tank. Prior to taking the second steps, wear the correct safety equipment, such as insulated gloves made of either leather or neoprene. It is very essential for you to protect your skin from touching the compressed gas, which is extremely cold.
2 The hose of the tank has to be disconnected, followed by removing the tank from its holding straps. When you put in a new tank, reconnect the holding straps and reconnect the hose at the valve of the tank by tightening the nut.
3 Leaks can be checked simply by applying soapy water to the valve and slightly opening it. If there is a leak, it would cause bubbles to foam from around the valve. If this occurs, inspect the valve area and the connection hose at the nut. Re-tighten the connecting nut if you detect any leaks around the area of the valve, and afterward perform the leak inspection process once more. Persistent leaks mean that both the nut and connecting hose will have to be replaced. Then again, if replacing the nut and hose still does not stop the leak, the tank would need to be replaced.
4 Open the valve all the way to enable the gas to fill the connecting hose. After that you can start the forklift and continue operating.